2019 Land Pride RCR1872
Ideal for cleaning around the farm, the pond, or empty lots in the city.
Features: Floating 3-Point wich allows deck to follow the terrain,A fully-welded deck that adds additional strength, it´s High blade tip speed ensures clean cut, Single or dual tailwheel on 84", a Heavy-duty tailwheel spindle, All-welded formed channels front to rear, wich add superior strength, and lower clevises for easy hookup
- Surpassed rugged industry standards: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
- 5 Year gearbox warranty: Shows our confidence in the gearbox integrity.
- Cat. 3 driveline with shearbolt: Shearbolt offers maximum driveline protection.
- Cat. 3 driveline with 2-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
- Dual position clevis type 3-point floating top link: Permits deck to follow the terrain for an even cut. Additional set of holes for tractors with shorter top links.
- Lower clevis type 3-point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
- Heavy 10 gauge deck construction: Can withstand more abuse than lighter gauge decks.
- Box tubing deck supports: Makes for a stronger rigid deck.
- Fully welded deck: Robotic welded. Adds additional strength.
- Extended cutter front: For increased material flow and added protection.
- Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
- 8 7/8" Deck height: Allows cutter to handle heavy cutting conditions.
- 1 1/2" to 11 1/2" Cutting height: Provides for a wide range of cutting conditions.
- Full length skid shoes: Provides sidewall reinforcement and full protection to bottom of sidewall.
- 1/2" x 3" Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
- Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
- 10 Gauge stump jumper: Standard round stump jumper slides over stumps, rocks, and debris.
- High blade tip speed: 14,853 FPM, Ensures clean cut.
- 15"Laminated tailwheel: Laminated material is long lasting in rough conditions.
- 4" x 16" Solid rubber tailwheel: Can’t go flat.
- Heavy-duty spindle on tailwheel: Tailwheels take a beating, 1 1/4" spindle gives the strength to protect tailwheel assembly.
- Guarding: Protect against flying debris. Customer must choose to include chain or rubber on the front and rear. Rear Metal Band standard.
- Driveline Holder: Keeps driveline up out of dirt. Easier hook up of driveline.
- Model Number: RCR1872
- Implement Weight: 737 lbs.(With laminated tailwheel, slip clutch driveline, front rubber guards and rear metal band)
- Hitch: Category l with floating clevis top link, Quick-Hitch ready
- Cutting Width: 72"
- Overall Width: 77"
- Overall Length: 110"
- Deck Height (Bottom of Deck to Bottom of Skid Shoe):9"
- Cutting Height:1 1/2" to 11 1/2"
- Cutting Capacity: 2" Diameter
- Recommended Tractor Horsepowe: 20-65 horsepower
- Power Take-Off Speed: 540 rpm
- Gearbox:1:1.46 Speed-up beveled gears, Cast iron housing
- Gearbox Oil Capacity & Lubricant: 4 Pints of EP 80-90W oil
- Deck Material Thickness: 10 Ga. (.134")
- Side Skirt Material Thickness: 10 Ga. (.134")
- Deck Construction: All welded deck
- Skid Construction: Full length welded on
- Stump Jumper: Round pan 10 ga. x 24" with blade holder bar
- Blades (2): 1/2" x 3" Heat treated alloy steel, Free-swinging high lift - low friction
- Blade Bolts: Keyed with harden flat washers & lock nuts.
- Blade Tip Speed: 14,955 FPM
- Driveline: ASAE Category 3 shearbolt or 2-plate slip-clutch, Driveline Protection; Optional - Center shearbolt protection; Optional - Center bolt 2 plate slip clutch
- Tailwheel Mount Assembly: Welded A-arm and caster fork with 360 degree swivel
- Tailwheel: 4" x 8" x 15" Laminated tire with cast iron hub or 4" x 16" molded rubber tire
- Front Guard: Optional: Rubber Belting, Accessory: Chain Guard
- Rear Guard: Standard: Metal Band; Optional: Rubber Belting; Accessory: Chain Guard
- Working Width
- 72 in.
- 77 in.
- 110 in.
- 737 lb.
- Recommended HP
- 20-65 hp