2024 Land Pride RCR1872
$3,850.00
Key Features
New/Used New
Availability
In Stock
LocationMcConnell Machinery
Condition
Excellent
Product Features
Dealer Notes
NEW!! 3pt. rotary cutter with slip-clutch driveline.
Description
Land Pride's RCR18 Series Rotary Cutters are ideal for light-duty maintenance around the farm, on gently slopes, or slightly contoured right-of-ways. A fully welded deck adds additional strength while the floating 3-point permits the deck to hug the terrain for a quality cut. The cutters have a category I three-point hitch and are Quick Hitch adaptable. They are offered with a standard ASAE Category 3 driveline with either shear bolt or slip-clutch protection and either a laminated or solid rubber tailwheel.
Features and Benefits
- Surpassed rugged industry standards: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
- 5 Year gearbox warranty: Shows our confidence in the gearbox integrity.
- Cat. 3 driveline with shearbolt: Shearbolt offers maximum driveline protection.
- Cat. 3 driveline with 2-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
- Dual position clevis type 3-point floating top link: Permits deck to follow the terrain for an even cut. Additional set of holes for tractors with shorter top links.
- Lower clevis type 3-point hitch
- Heavy 10 gauge deck construction: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
- Box tubing deck supports: Can withstand more abuse than lighter gauge decks.
- Fully welded deck: Makes for a stronger rigid deck.
- Extended cutter front: Robotic welded. Adds additional strength.
- 8 7/8" Deck height on RCR1872: Helps discharge grass better than enclosed or partially enclosed cutters.
- Round back design: For increased material flow and added protection.
- 1 1/2" to 11 1/2" RCR1872 Cutting height: Allows cutter to handle heavy cutting conditions.
- Full length skid shoes: Provides for a wide range of cutting conditions.
- 1/2" x 3" Heat-treated free swinging blades: Provides sidewall reinforcement and full protection to bottom of sidewall.
- 10 Gauge stump jumper: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
- Splined blade bar hub: Free swinging protects from obstructions. Heat-treated offers longer life.
- High blade tip speed: Standard round stump jumper slides over stumps, rocks, and debris.
- RCR1872 = 14,853 FPM
- 15"Laminated tailwheel: Laminated material is long lasting in rough conditions.
- Heavy-duty spindle on tailwheel: Tailwheels take a beating, 1 1/4" spindle gives the strength to protect tailwheel assembly.
- 4" x 16" Solid rubber tailwheel: Can't go flat.
- Guarding: Protect against flying debris. Customer must choose to include chain or rubber on the front and rear. Rear Metal Band standard.
- Driveline Holder: Keeps driveline up out of dirt. Easier hook up of driveline.
Specifications & Capacities
- Implement weight: 737 lb.
- Hitch: Category l with floating clevis top link, Quick-Hitch ready
- Cutting width: 72"
- Overall width: 77"
- Overall length: 110"
- Deck height (Bottom of deck to bottom of skid shoe): 9"
- Cutting height: 1 1/2" to 11 1/2"
- Cutting capacity: 2" Diameter
- Recommended tractor hp: 20-60 hp (15-45 kw)
- Power take-off speed: 540 rpm
- Gearbox: 1:1.46 Speed-up beveled gears; Cast iron housing
- Gearbox oil capacity & lubrication: 4 Pints of EP 80-90W oil
- Deck construction: All welded deck
- Deck material thickness: 10 Ga. (.134")
- Skids shoes: 10 Ga. (.134")
- Stump jumper: Round pan 10 ga. x 24" with blade holder bar
- Blades (2): 1/2" x 3" Heat treated alloy steel; Free-swinging high lift - low friction
- Blade bolts: Keyed with harden flat washer and locknut
- Blade tip speed: 14,955 FPM
- Driveline: ASAE Category 3 shearbolt or 2-plate slip-clutch
- Tailwheel: 4" x 8" x 15" Laminated tire with cast iron hub or 4" x 16" molded rubber tire
- Driveline protection: Optional - Center shearbolt protection; Optional - Center bolt 2 plate slip clutch
- Skid Construction: Full length welded on
- Front Guard Optional: Rubber Belting; Accessory: Chain Guard
- Rear Guard Standard: Metal Band; Optional: Rubber Belting; Accessory: Chain Guard
General
| Working Width | 72 in. |
| Width | 77 in. |
| Length | 110 in. |
| Weight | 737 lb. |
| Recommended HP | 20-60 HP (15-45 kw) |
