2024 Kubota BB3084

Call for Price

Call for Price

Overview

Availability Brochure
Year2024
MakeKubota
ModelBB3084

Product Features

Description

Kubota by Land Pride: The BB30 Box Blade allows users the option of rough or precision grading finishes. Basic grading work can be done in applications requiring a rough grade such as landscaping and initial surface prep. Precision grading can be accomplished with the addition of a laser system to accurately control site preparation and flat-work operations. This dual-plane grader will automatically lift and tilt as it moves over the ground for precision grading and is designed specifically for use with Kubota power units.

Features
  • Bi-directional with hinged cutting edges: Allows the operator to grade while traveling forward or backward. Hinged cutting edges allow the trailing cutting edge to ride on top of the soil and not dig into the ground.
  • Floating front axle: Allows both gauge wheels to be in contact with the ground at all times keeping the load distributed equally between the two wheels.
  • Reversible and replaceable side cutters.: Side cutters are constructed of abrasion-resistant AR400 steel, can be reversed to increase their wear life, and are replaceable when worn out. They protect the end panels from high wear.
  • Bolt-on and adjustable side cutters: Side cutters can be adjusted down as they wear.
  • Replaceable end panels: End panels are made of grade 50 material and can be replaced should they become damaged or worn out.
  • Optional masts for receiving third party laser technology: See "Supports third part laser/2D" below
  • Plug and play valve controller: Simplifies the process of connecting an auto-grating system to the AP-BB30.
  • Supports third party laser/2D or GPS/3D control system: Tilt and height control can be automated resulting in precision accuracy. Level grade can be achieved in a fraction of the time eliminating operator fatigue and saving money in fill and concrete.
  • Lift/tilt motions kept constant with parallel links: Parallel links keep the blade angle to the soil consistent throughout the blade's range of motion.
  • Foam-filled turf tires: Tires won't go flat.
Specifications
  • Working width: 84 in. (213 cm)
  • Weight without mast: 1,836 lb. (833 kg)
  • Weight of mast: 64 lb. (29 kg)
  • Upper frame cross tube: 4 x 6 in. (10 × 15 cm)
  • Lower frame cross tube: 2 x 4 in. (5 × 10 cm)
  • A-frame tubes: 4 × 4 in. (10 × 10 cm)
  • Blade lift pin diameter: 1 in. (2.5 cm)
  • Blade tilt pin diameter: 3 in. (7.6 cm)
  • Blade tilt angle adjustment: Tilts up to 15 degrees down left and 15 degrees down right.
  • Blade height adjustment: Adjusts from 5 in. (13.7 cm) above grade to 3 in. (7.6 cm) below grade
  • Grader blade: Reversible and replaceable, 1/2 × 6 in. (1.3 x 15.2 cm)
  • Reversible side cutters: 1/2 in. (1.3 cm) thick
  • Tires: Foam-filled turf 18 x 8.5 x10 in.
  • Hydraulic Maximum flow Maximum pressure: 25 gpm (94.6 Lpm) 3500 psi (24.1 mPa)
  • Cylinder control valve: Pilot controlled
  • Floating blades: Front and rear

Dimensions

Working Width 84 in. (213 cm) Cutting Width

General

Weight 1,836 lb. (833 kg) Weight

Shopping Tools